Suction Cups and Vacuum Grippers

The grip starts at the workpiece
A suction cup has to seal against the part you actually handle. Surface texture, curvature, porosity and flexibility can matter as much as weight. A larger cup or a stronger vacuum source does not automatically solve a poor contact.
Vacuum lowers the pressure inside the cup, allowing the surrounding air pressure to press the workpiece against it. Flat cups, bellows cups, oval cups and larger vacuum grippers provide different contact shapes and degrees of compliance. Multi-cup and area grippers spread contact across a workpiece or picking area.
This category covers the cups and grippers that contact the part. Vacuum generators create the vacuum, while mounts, tubing, valves and sensors complete the handling system. Cup selection and vacuum generation need to work together.
Three practical applications

Opening cartons
Cups pull a carton wall away from its folded position while guides control the opposite side. Bellows can accommodate changes in contact height, but cardboard leakage, coatings and creases still affect the seal. The contact area needs to stay clear of folds and damaged edges.

Removing molded parts
Suction cups on a robot tool remove a molded plastic cover. Cup geometry must fit the available surface without distorting the part. Part temperature, surface finish and any later painting or bonding process influence the choice of cup material.

Handling flexible pouches
A vacuum tool picks a sealed pouch from a tray or conveyor. Flexible film can wrinkle or draw into the cup, so lip design, contact support and the position of seams matter. A cup that grips a rigid panel well may behave very differently on a pouch.
These are illustrative applications, not reports of specific customer installations.
Three brands to know
These independent supplier examples illustrate the range of products available. They are not a ranking or a statement that Airmotion Directory represents or supplies these companies.
ANVER
United States
ANVER offers Universal Vacuum Suction Cups in flat, single-bellows and multiple-bellows configurations with interchangeable fittings. Its range includes different rubber compounds and mounting options for product transfer, packaging and material handling.
FIPA
Germany
FIPA offers flat, bellows, oval and special vacuum cups, along with mounting accessories and area grippers. Its range addresses differences in workpiece shape, surface and available gripping space, including handling flexible products.
SAPELEM
France
SAPELEM designs and manufactures molded suction cups in flat, multi-bellows and oblong forms, as well as larger handling cups. Different materials, lip designs and mounts serve industrial and robotic handling tasks.
What should you compare?
Seal and usable contact area. Check the actual surface, including texture, seams, holes, curvature and contamination. Nominal cup diameter alone does not describe the effective sealed area or whether the lip can maintain contact.
Shape, compliance and motion. Bellows can compensate for height variation, while flat cups can provide greater lateral stability. Include acceleration, load direction, cup spacing and the workpiece’s center of gravity when comparing a complete gripping arrangement.
Material and process compatibility. Consider temperature, oil, abrasion, marking and downstream processes. A material name by itself does not establish food-contact suitability, an operating temperature limit or compatibility with painting. Check the specific product documentation.
Vacuum supply and loss of grip. Porous or leaking parts need sufficient suction flow. Review evacuation time, monitoring, release behavior and the response to a loss of vacuum or air. A cup’s catalog holding figure is not a complete rating for a moving load.
What brought you here?
Buying or exploring an application?
Exploring one application? Explore Application IQ.
Already considering a purchase, supplier recommendation, or quotation? Explore the Buyer’s Second Opinion.
Selling or leading a business?
Working on a specific customer opportunity? Explore the Seller’s Second Opinion.
Own or lead a pneumatic or compressed-air business and want to examine its online revenue system? Explore Full Flow and Working Pressure.
Have a suction-cup or vacuum-gripper requirement?
Send the part material, dimensions and weight, surface condition, handling direction, cycle time, quantity and delivery location. A photo, drawing or existing cup number can help explain the requirement. Product inquiries are separate from the advisory services above.
